RHIN CURVED POST
SHAFT: Truncated cone.
CONICITY: 12,5 ‰
SECTION: Circular.
MATERIAL: Carbon steel S235JR in compliance with UNE EN 10025.
Produced according to regulation UNE EN 40-5.
Other material: Structural steels with improved atmospheric corrosion resistance (corten steel) of minimum quality S235JR, according to UNE EN 10025-5.
GALVANIZED: Hot-dip galvanized according to UNE EN ISO 1461 standard.
FINISH: Option of painting with a colour chosen from the RAL chart.
DOOR: Even.
BASE: Flat plate, ring and reinforced brackets.
HEIGHT: Up to 12 m.
COLUMN DIMENSIONS – MODEL RHIN
Note: Dimensions to verify before manufacturing.
| MODEL | H (m) | D (mm) | W (m) | r (m) | E (mm) | e (mm) | f (mm) | g (mm) | Bolts Ø y L |
|---|---|---|---|---|---|---|---|---|---|
| RHIN | 7 | 60 | 1.5/2.0/3.5 | 6,50/25 | 3/4 | 10 | 285 | 400 | M-18×500 |
| RHIN | 8.5 | 60 | 1.5/2.0/3.5 | 6,50/25 | 3/4 | 10 | 285 | 400 | M-20×700 |
| RHIN | 10 | 60 | 1.5/2.0/3.5 | 6,50/25 | 4 | 10 | 285 | 400 | M-22×700 |
| RHIN | 12 | 60 | 1.5/2.0/3.5 | 6,50/25 | 4 | 10 | 285 | 400 | M-22×700 |